This History Behind Citroen Remote Key Replacement Is One That Will Haunt You Forever!

· 4 min read
This History Behind Citroen Remote Key Replacement Is One That Will Haunt You Forever!

Citroen C3 Key Replacement

Citroen is a well-known French car maker. They are known for their unique designs however, they're also well-built with excellent fuel economy. The C3 is not an exception.

Prior to 1997, Citroen keys didn't utilise transponders so making spares for these models is fairly simple and can be done in just a few minutes. From 1998, however they all come with the fixed code philips type 33 transponder so the key needs to be programmed.

citroen dispatch key fob replacement  of the most common reasons for the Citroen C3 not starting is due to a dead battery. To make sure this is the problem, you should check the voltage of the battery using a multimeter. If the voltage is lower than 12 volts, it could be necessary to replace the battery. Also, you can test for corrosion on the battery terminals by removing the pole cables and cleaning them.

Another possible cause of the Citroen C3 not working is due to damaged spark plugs. These are usually caused by rodent damage, which is why it's crucial to monitor your van or car for indications of rodent activity beneath it. If spark plugs are damaged, they can't start and your engine won't start.

From 1998 all Citroen vehicles are equipped with transponder chips in the remote fob / key. They must be programmed to allow the vehicle to start, lock and unlock doors. Making spare keys for the era of Citroen is relatively simple and can be completed on the spot in just a few minutes. Lost keys require an PIN code, which can be found under a scratch panel on a plastic 'SECURITY CARD' the size of a credit card in the owners wallet (see the picture below).

XL Locksmiths offers a mobile service that is fast and efficient for Citroen key replacement for vehicles. Based in London they can be at your location within 30 minutes to repair any car key issues you might encounter. They can also help you to reprogramme your Citroen.

Keyless entry systems that fail

If your car shows Key not detected or you can't start the engine when you press the key fob button, there may be an issue with the keyless entry system. This can be caused by a variety of causes, including an insufficient or dead battery in the keyfob and a chip that is damaged in the key. These issues could also be caused by water damage. To resolve the issue, try reprogramming the key or replacing the batteries.

You should always make sure to use authentic Citroen key batteries. They come with metal clips that help hold the battery in place and complete the circuit. If you are replacing the battery, ensure it is a new one with the same size and voltage that the previous one. It could damage the fob if you don't.

A damaged receiver can cause issues with your keyless entry system. A malfunctioning module may be difficult to determine as it could be sporadic or intermittent. It is possible to diagnose the issue by removing the batteries for a few minutes. This will reset the onboard computers.

You can reprogram your C3 by following the steps in the owner's guide, if you have an extra. Every model and every manufacturer has a different method for reprogramming a C3 Citroen Key. Read the manual to get the specific instructions.

Faulty receiver module

Citroen is a French car manufacturer with various models that include the Xsara, Berlingo, Picasso, Cactus and Tourer. The models are equipped with remote keys that allow you to lock or unlock the vehicle without the need to insert the keyblade into the door lock. The remote key communicates with the central locking system of the vehicle using a radio frequency. If the signal is interrupted, your key may not operate, or only work when you are close to it. The interference is caused by objects and weather conditions. It can also be caused by transmitters operating on the same frequency.

A dead coin battery or a malfunctioning module could cause the key fob's functionality to cease. The dead coin battery is usually the first component to be replaced and it should take just a few minutes. Replace the battery for the button by a brand new one, making sure you replace it with a brand new battery with the same voltage and size. After replacing the battery test the start/lock/unlock buttons to verify that they're functioning correctly.


The key fob can also malfunction due to water damage or a lost transponder chip. If the key has been lost, a professional will reset the synchronization with the car with specialized diagnostic equipment. It's much less expensive and faster to do this than to buy a new set from the dealer.

Chip that isn't working

Citroen is a name that is renowned for its innovation. Their cars are known for their distinctive design as well as benchmark comfort and performance. They may also experience issues. These problems usually involve the key fob or chip. The majority of these issues are easily fixed.

The key fob on your Citroen C3 is designed to be a little more robust than the majority of car keys. It can be damaged by water. The key fob might be damaged if it accidentally falls into the sink or washing machine. To prevent this from happening, make sure that the key fob is fitted with metal retaining clips that hold it in the right place. These clips will ensure that the battery contacts are clean and free of corrosion.

You should also ensure that the circuit board on your Citroen C3 is intact and not damaged. If the circuit board is damaged, it can hinder the key from functioning correctly.

It is essential to get in touch with a local expert as early as you can when you lose your sole Citroen car key. You can replace the key quickly and efficiently. You can also save a significant amount of money by using the mobile locksmith instead of going to a dealer.